dcs 900 ad 컨버터에 관해 여쭙니다~
페이지 정보
본문
사용했는데요~
아웃용으로 사용했습니다.
클럭은 자체 크리스탈이 워낙 좋아 마스터로
쓰고 있구요~
그런데 기기의 뒤에보면 aes ebu 단자가 있습니다.
하나는 reference 하나는 output 이렇게
두개가 있는데요.
여기서 질문입니다~
레퍼런스라 함은 클럭인풋의 기능을 하는걸로 알고있습니다.
그런데 aes ebu output 의 기능이 궁금합니다.
지금 이 아웃단자를 다른da컨버터의 reference in으로
연결하여 클락을 보내고 있는데요.
이 아웃단자가 클락만을 보내는 기능을 하는것인지요..?
아니면 들어오는 analog신호를 변환하여 다른기기로 보내는
오디오 아웃기능도 하는것인지요~
이점이 갑자기 햇갈리네요;
디지털 오디오 아웃기능과 클럭아웃 기능을 동시에
할수있는지요?
지금까지 dcs의 신호를 받고있는 da컨버터는
클럭입력을 정상적으로 인식하고 있습니다.
혹시 이런 기기의 경험이 있으신 회원님의
소중한 답변 기다리겠습니다~
감사합니다.
관련자료
백곰01님의 댓글
dcs ad900은 vcxo 클럭을 쓰는 데요
더 좋은 클럭을 외부입력을 통해 연결하면 좋은 결과를 얻을 수 있을 것 같습니다
aes ebu out을 다른 컨버터 클럭을 연결 할 때 AES C에 관련한 메뉴얼 부분 입니다..
Reference In is an AES/EBU reference input for synchronising the unit to a Master Clock. AES C is a Reference loop through, directly coupled to it. A terminating resistor may be turned on or off, using the menu, if several units are to be daisy chained.
---------------------------------------------------------------------
Sets the mode of the AES Reference In / AES C Out connectors. The options are:
Loop ---
Loops the Reference In through to the AES C output, with no termination resistor (termination is then about 1kohm, so several units can be daisy chained).
Loop.t ------
As above, but terminates the input. Use at the end of a daisy chain.
Int----------
The output (and input in parallel – beware!) is internally driven, with the same signal as AES 1.
더 좋은 클럭을 외부입력을 통해 연결하면 좋은 결과를 얻을 수 있을 것 같습니다
aes ebu out을 다른 컨버터 클럭을 연결 할 때 AES C에 관련한 메뉴얼 부분 입니다..
Reference In is an AES/EBU reference input for synchronising the unit to a Master Clock. AES C is a Reference loop through, directly coupled to it. A terminating resistor may be turned on or off, using the menu, if several units are to be daisy chained.
---------------------------------------------------------------------
Sets the mode of the AES Reference In / AES C Out connectors. The options are:
Loop ---
Loops the Reference In through to the AES C output, with no termination resistor (termination is then about 1kohm, so several units can be daisy chained).
Loop.t ------
As above, but terminates the input. Use at the end of a daisy chain.
Int----------
The output (and input in parallel – beware!) is internally driven, with the same signal as AES 1.