Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they are not susceptible to rust or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames of the past easily. If you have double-paned windows that are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this case you'll need to source some plastic spacers that assist the new pane to fit perfectly into the frame of the window.

If you're planning attempt to remove the window panes yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. You should also lay down a drop cloth before you begin working on the Window Repair panes, so that any shards fall on the fabric and not onto the floor, where they could be trampled.

It's a great idea to tape the gap once the glass has been removed. This will keep drafts and water from getting into your property until a professional arrives to fix the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the distance between the door and the window is large, you might need to consider an alarm system that includes an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. As time passes, they may be affected by a variety of issues such as sagging. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from worsening.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows so you can access the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and verify the fit. If you're satisfied with the fit of your window, tighten the screws to hold them in place.

If you are unable to move the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. Often it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. First, you'll need close the window and perform an initial test fit. The corner joints of the sash should be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it is important that you take action. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on how serious the problem is, the old caulking might need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs near me repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious instances, you may need to think about replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens in an ease. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical component, hinges can be damaged over time. It is very easy to replace a hinge on a window, but it's easier if someone helps you to hold the frame.

Make sure that the uPVC hinges are closed and open in the right direction. This can be done by looking for the arrow on each hinge, this indicates which way the window should open.

The issue can be caused by opening the window incorrectly or a faulty installation in the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to give assistance.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It can also prevent corrosion and decrease the chance of sticking. It is recommended to do this once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also become unbalanced due to wear, creating an opening where the sash and frame meet. If they are beyond repair, it could be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window and can also become misaligned, again it may be feasible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

The next most common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also lessen the risk of draughts.

One of the most effective ways to reduce drafts is to use a draught excluder. These are typically made of fabric filled with some type of filler. They can be positioned on the top of your windowsill. They can keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is important to remember that all windows eventually wear out and it may be more cost-effective to simply replace them than to repair them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional as soon as you can.